Pole saws are powerful tools that can help you cut down trees and other materials. They’re also heavy, however, which makes it critical to take good care of them. Here’s how:
Read the manual.
Before you use a pole saw, make sure to read the manual. It will tell you how to operate it and maintenance tips for keeping it in good condition. You should also know how to store it so that it doesn’t rust or get damaged by moisture. Finally, if you need help transporting large pieces of lumber or wood off-site after cutting them down with your pole saw, check out this article from Reader’s Digest on how they went about doing so!
Change your oil.
The best way to keep your pole saw running smoothly is by changing your oil regularly. You should change the oil every three months or so, depending on how often you use the tool and whether it’s stored in a damp environment.
You should use a synthetic blend of 10W-30 engine oil if you plan to operate your pole saw for long periods of time (such as hunting season). Synthetic blends are compatible with all kinds of engines, including gasoline ones; they’re also less likely than conventional oils to cause corrosion or gum up injectors. If you’re unsure which kind will work best for your specific application, ask an experienced mechanic at a local auto shop before purchasing any type of product!
Change your air filter.
Your pole saw’s air filter is the key to reducing wear and tear on your machine. If you don’t change it regularly, you’re bound to run into problems sooner or later.
The best time to change your filter is right after you finish using the machine for an extended period of time (like when you’ve been working all day). This way, any debris that’s been picked up by the blade will be trapped in there while its new life cycle begins!
To change this thingy, just take off its access panel and remove the old one from underneath—it should only take about 15 minutes with minimal effort required (and no tools required). Then replace it with a new one: You can get these anywhere from $10-50 depending on which brand of filters they sell; if possible try going through Amazon because they usually have great deals like this one here at just $6 per pack!
Sharpen your blade regularly.
- How often should you sharpen the blade?
In most cases, the answer is “as frequently as possible.” A dull blade is more likely to break and cause injury, so it’s best to keep it sharp. If you don’t want to invest in a sharpener or spare blades of your own, there are plenty of options available online and at hardware stores that will do the trick for about $5-$10 each.
- How do I know when my pole saw needs sharpening?
The best way to tell if your pole saw needs a tune-up is by inspecting its teeth—the serrated-like teeth on either side of its blade will show signs of wear after a few uses (see image below). They should also be uniform in length from end-to-end; if one side looks longer than another then it’s time for some serious sandpaper action!
Clean your saw.
You should never use water to clean your pole saw. The blades and other parts of the tool can be damaged in this way, so it’s important to use a brush or cloth instead. Oil and WD40 are also not recommended for cleaning purposes because they can cause corrosion on metal parts of your pole saw.
Store your pole saw correctly.
The first thing you should do is store your pole saw in a dry place. This will help prevent rust and corrosion, which can make it harder for the blade to cut through wood. It’s also important to keep your pole saw away from moisture; if there’s moisture on the ground near where you’re storing it, try to keep it away from that area as well.
You may want to consider storing it vertically (this is especially helpful if only one side of the bar faces down). If possible, store your pole saw on its side so that there isn’t any weight on either side of the bar when carried by hand—this will help reduce strain on both hands while using it every day!
You should avoid storing any tools whose handles face upward (like screwdrivers) since this puts tension on all sides of those tools’ handles when being used repeatedly over time.”
Proper maintenance will help your pole saw last longer and work better.
Proper maintenance is the key to caring for your pole saw. It will help you get more use out of your saw, keep it working safely and save money in the long run.
When you take good care of your pole saw, it will last longer and work better:
As you can see, proper maintenance of your pole saw is very important. You should always check the manual for specific details about how to do it, but here are some general guidelines: Read the manual; change the oil and air filter regularly; sharpen the blade regularly; clean the saw on a regular basis with soap and water or a wire brush; store away from direct sunlight and heat sources like doors or windows.