How To Sharpen a Chainsaw with Dremel?

Spread the love

Chainsaw blades don’t remain sharp forever. The kind of work you do and depending on how often you use your chainsaw, will determine the machine’s wear and tear. They, like any other machine, require regular maintenance and especially on the edges.

Sharpening the chainsaw and properly caring for it far is less expensive than constantly purchasing new. A sharp chain reduces the possibility of kickback and injury and also leads to more productivity and efficiency. 

If you’re wondering whether a Dremel chainsaw sharpener is appropriate for your equipment, read on to learn more about how to sharpen a chainsaw with a Dremel.

How can you tell if the chainsaw chain is not sharp?

A decent chainsaw will cut wood more effectively, safely, and swiftly. A dull chainsaw blade is more difficult to use and is more likely to kick back.

So, how can you tell if the chainsaw chain is dull?

It’s dull if your chainsaw produces dust instead of wood chips when it cuts. It’s dull if you need to physically push the chainsaw to make the cut.

The chainsaw should cut wood without requiring any physical force from you.

How do you know if it’s worth sharpening your chainsaw?

Yes, of course. Chains are not only expensive, but they can also be time-consuming and inconvenient. Especially if you have to replace them frequently. Taking down and reassembling a chainsaw is more difficult than simply using a Dermal to sharpen a chainsaw.

For safety reasons, you’ll also need a good chainsaw. A dull chain is more likely to rebound and cause harm.

So, follow these steps to properly sharpen a chainsaw with the Dremel. Before purchasing a new chain, you may generally sharpen it 10 times. If you have a $35 chainsaw chain, sharpening it can save $350! Who doesn’t want an extra $350?!!

Is it possible to sharpen a chain with a Dremel?

Dremel is a brand well-known for its sharpening and rotatory tools. A Dremel is also a tool that might be used for a variety of purposes. It comes with several attachments and add-ons. It’s also adjustable, so you can set it to your specific height and then attach the rotary head for quick and easy sharpening of your chainsaws. 

Therefore, yes, it is possible to sharpen the chainsaw with Dremel. Dremel tools provide an incredibly simple method to sharpen the chain of a chainsaw. The Dremel Sharpening Kit includes a guide to keeping the Dremel level and at a proper angle while sharpening.

Make Preparations


Before you start to sharpen a chainsaw with Dremel, you must first prepare your tools and workspace accordingly.

Gather the following items

You’ll need a tarp or a newspaper, oil for the knife, and a Dremel with a diamond grind attachment. A pair of gloves, a hard hat, safety goggles, and an overall are also required whenever you’re working with tools. Your safety gloves will shield your hands from harm and cuts. On the other hand, eye protection will guard your eyes against the iron filings. It is always preferable to avoid major damage than to treat it. As a result, staying attentive and using safe procedures are critical.

Look for a location with enough room

It is also critical to select a pleasant and open area before sharpening your saw. It will not put any strain on you to use it. The garage or a space in the backyard is the greatest location for this usage. You’ll be least disturbed if you carry out the operation in your garage. You may also handle waste disposal effectively. A garage has plenty of room to store the equipment, and it is well-organized.

Finally, there are also several garages that have a special area just for sharpening.

How to use Dremel for sharpening a Chainsaw 

Follow these steps to sharpen a chainsaw using Dremel.

  • Take a look at the Dremel Chainsaw Sharpening Kit to see which Dremel sharpening bit you’ll need for the chainsaw.
  • Attach the Guide and bit to the Dremel.
  • Use a black marker to mark the tooth on the chain where you need to begin.
  • To avoid injury, put on heavy-duty gloves before handling cutlery.
  • When you’re done sharpening all of the teeth on your Dremel, run a Dremel Sharpening stone over them all to keep the Dremel level and at a proper angle for each tooth. Sharpen that tooth with the Dremel.
  • To keep the teeth of the chain uniformly sharp, be sure to sharpen each tooth for the same length of time (for example, to a count of 10).
  • The teeth on the chainsaw are all in the same direction. On your sharpening guide, the ones between are sharpened in the opposite manner. So, pay attention to the tooth’s orientation while sharpening.
  • Sharpen every tooth on the chainsaw blade until you’re back at the black mark you drew on the first tooth.

Don’t Make These Mistakes When Sharpening a Chainsaw

There are a few things you should and shouldn’t do while sharpening your chainsaw.

  • The chainsaw blades have been over-sharpened.
  • Using a file that is the incorrect size
  • Using a dull file to sharpen the chainsaw
  • Rather than a depth gauge, use filing cutters.
  • Do NOT file backward

Other than these blunders, you should always utilize the appropriate chainsaw sharpening angles. This is extremely important, as it will ensure that the chain is stretched correctly. Failure to do so can result in the blades and/or chain being damaged.

Some tips

You have the option of sharpening your chainsaw manually with a file or using an electric chainsaw sharpener. Some individuals may even argue that sharpening it with their hands is acceptable, but this method is time-consuming and exhausting. Power chainsaw sharpeners are the most efficient, effective, and time-saving method of sharpening a chainsaw.

The efficacy of any device is determined by its ability to avoid wear and tear on its components. Using a chainsaw without oil will destroy it. The chain quickly wears down as a result of friction with the chainsaw bar. When you want to use your chainsaw, check the oil level.

Leave a Comment